27
Copyright © Puretec Pty Ltd 2022
SOL-2CI Commercial Series User Guide
Setup Programming
When the system begins to regenerate, the display will change to
include information about the step of the regeneration process
and the time remaining for that step to be completed. The system
runs through the steps automatically and will reset itself to
provide treated water when the regeneration has been completed.
Manual Regeneration
Sometimes there is a need to regenerate the system sooner
than when the system calls for it, usually referred to as manual
regeneration. There may be a period of heavy water usage
because of guests or a heavy laundry day for example.
Immediate Regeneration:
To initiate a manual regeneration
immediately, press and hold the "REGEN" button for three seconds.
The system will begin to regenerate immediately.
Note:
The control valve may be forced through the various
regeneration cycles by pressing the "REGEN" button.
Delayed Regeneration:
To initiate a manual regeneration at the
preset delayed regeneration time, press and release "REGEN". The
words "REGEN TODAY" will flash on the display to indicate that the
system will regenerate at the preset delayed regeneration time.
If you pressed the "REGEN" button in error, pressing the button
again will cancel the request.
If the regeneration time option is set to "on 0" there is no set
delayed regeneration time so "REGEN TODAY" will not activate if
"REGEN" button is pressed.
Note:
For softeners, if brine tank does not contain salt, fill with
salt and wait at least two hours before regenerating.
Summary of Contents for Puretec Commercial SOL-2CI Series
Page 36: ......
