WL500
Manual
Page 60 Revision 4‐10‐2019
WARNING!
RELIEVE WATER AND CO
2
PRESSURE BEFORE ATTEMPTING TO SANITIZE SPARKLING
TANK.
Accessing Sparkling Tank
4.
Remove Sparkling Water Level
Sensor Wires
5.
Remove Sparkling Water Level Sensor Fitting and Probe to access
Sparkling Tank.
6.
Remove Fitting from CO
2
Line
7.
Attach Water Inlet Valve
8.
Add 1‐2 drops of Bleach into the Sparkling Tank through the
Sparkling Water Level Sensor line.
9.
Connect Drain Water line and fitting to the Sparkling Water
Level Sensor line.
10.
Flush 3‐5 Gallons through Sparkling Tank. There
should be no bleach smell after flushing.
11.
Reconnect Sparling Water Level Sensor, Fitting and Wires.
Sparkling Water Level Sensor
Fitting and Probe
Drain Line
Sparkling Water
Level Sensor
CO
2
Line
