WL1000GF MAX
Manual
Page 19 Revision 10-7-2017
7.
Mix descaler per instructions.
8.
Add descaling mixture to Reservoir Port.
9.
Turn on water supply and plug in unit.
10.
Allow reservoir to fill.
11.
Turn on the Red Heater and Compressor Power Switch.
I=ON
position.
12.
Allow descaling mixture to remain in Hot Tank for 15 minutes
(exposure time may be affected by local water conditions).
13.
Flush Cold and Hot Tanks unit until all descaler is removed.
14.
Ensure all outer panels and faucets are descaled during this process.
WARNING!
HOT WATER HAZARD.
Unit Produces Very Hot Water and Steam. Always use
insulated and chemically compatible containers and let unit cool down before draining the Hot
Tank to avoid injury.
CAUTION
!
MUST REPLACE HOT TANK 5 YEARS DEPENDING ON USAGE
. The Hot Tank and
its controls must be replaced a minimum of every 5 years depending on usage to ensure
efficient and dependable operation.
WARNING!
REINSTALL ALL PANELS AND COVERS.
Always reinstall all panels, protective
covers, and fasteners after servicing equipment. Failure to do so could result in severe
personal injury and will void the certifications and warranty of the equipment
.
