WL1000GF MAX
Manual
Page 10 Revision 10-7-2017
OPERATING INSTRUCTIONS
The above picture shows the Front Water Dispense Buttons for the
Waterlogic WL1000GF MAX
Water Treatment System
.
Place appropriate receptacle under the Hot or Cold areas for dispensing water.
For Hot Water:
1. Press and hold down the Red Hot Safety Button (LEFT hand side)
2. Press the Red Hot Dispense Button (RIGHT hand side)
*Both buttons must be held at the same time to dispense Hot Water.
This is a
safeguard when dispensing hot water to prevent accidental dispensing of hot
water.
For Cold Water:
Press Blue Cold Water Select Button
