CUBE
Manual
Page 20 – Revision 10‐8‐2018
3.
Switch off the Red Power and the Green Heater/Compressor Switches
O=OFF
at the rear of
the machine and remove the power lead from the unit.
4.
Use a Phillips‐head screwdriver to remove the two screws at the
rear of the machine that secure the Top Cover if installed.
5.
Remove the Top Cover by placing your hands
on the Top, and push it towards the rear of
the
CUBE
then lift to remove.
6.
Next, remove the Filter closest to the front of
the machine.
Insert your finger into the round hole of the
lever, and pull the lever up to the vertical
position.
7.
Pull the lever straight up to remove the filter assembly (some slight
force may be required)
.
Verify the filter removed is the 10‐inch CBC filter. If the filter is
labeled differently, call 1‐800‐288‐1891 Technical Assistance.
8.
Unscrew the filter body from the filter head by turning the base in a clockwise direction.
9.
Pour away the excess water.