49
Versatec Series products are an excellent choice where versatility and
compact size are important considerations.
Units include reciprocating compressors, R-22 refrigerant and PSC
blower motors. With PSC blowers, units operate with only one fan
speed regardless of the mode of operation. However, the fan speed
can be adjusted internally by your dealer.
With standard electromechanical controls, Versatec units are easy to
troubleshoot and repair. Safety devices prevent operation when condi-
tions exist that would damage the unit. If the heating and cooling func-
tions are inoperable, you may be able to reset the unit by turning off the
unit’s breaker for 60 seconds, then turning it back on. If the unit does
not operate after resetting, do not attempt another reset as doing so
may damage the unit or components. Contact your dealer for service.
In northern climates, Versatec units may include an optional duct mounted auxiliary heater. In the unlikely event of
a compressor failure, the auxiliary heater will provide emergency heat to maintain temperatures within the home. If
your thermostat is set to a normal heating mode, and you see an Emergency Heat signal on your thermostat, con-
tact your dealer. This same auxiliary heater may be used during cold outdoor air temperatures to assist the Versatec
unit in maintaining warm indoor temperatures. This is a normal function, and your geothermal unit will continue to
operate. Depending on your thermostat, you may see an Auxiliary Heat signal during this time. Your dealer can tell
you the approximate outdoor temperature when the auxiliary heat may be activated. For more information on auxil-
iary heat, see page 51.
Versatec Series units are performance-certifi ed to ARI ISO 13256-1 standards, and are ETL safety listed.
Versatec Series Units
PRODUCT INFORMATION FOR UNITS, OPTIONS & ACCESSORIES
