8
STEP 4
–
IMMEDIATE REGENERATION:
The manufacturer has set the regeneration to
occur when zero gallons remain . When this occurs, the standby tank will switch
into service and provide treated water while the tank requiring regeneration will
start this process .
Press
next
to go to step 5 . Press
regen
to return to the previous step .
STEP 5
–
SERVICE ALARM GALLONS:
The manufacturer has factory set “OFF”
as the default . This feature is used to signal service into the future . This is
typically set by the installing dealer to warn homeowner that service is
required after a preset number of gallons have been consumed . If the
feature is active, a specific gallon amount will appear .
Press
next
three times to advance past this screen .
STEP 6
–
SERVICE ALARM TIME:
The manufacturer has factory set “OFF” as the
default . This feature is used to signal service into the future . This is typically
set by the installing dealer to warn homeowner that service is required after a
period of time has passed . If the feature is active, a specific number of days
will appear .
Press
next
three times to advance past this screen .
STEP 7
–
ALARM BUZZER:
The manufacturer has factory set “ON” as the default . An
alarm will sound (at the indicated time) after a regeneration, if there is no salt
or if another error has occurred . Turn the alarm “OFF” or “ON” using the
+
or
—
buttons . Press
next
.
NOTE:
This feature allows you to program the time in which the alarm
buzzer will sound, permitting the installer to pick a time when the owner will
be home or awake to hear it .
Setting Alarm Buzzer Start Time:
Press
+
or
—
button to select the correct
hour the buzzer is to start sounding . Be sure to also set AM or PM as necessary .
(Default is set to 6:00 a .m .) Press
next
.
Setting Alarm Buzzer End Time:
Press
+
or
—
button to select the
correct hour the buzzer is to stop sounding in the day . Be sure to also set
AM or PM as necessary . (Default is set to 10:00 p .m .) Press
next
.
STEP 8
–
DISPLAY BACKLIGHT:
The manufacturer has factory set “ON” as the
default . Turn the light “OFF” or “ON” using the
+
or
—
buttons . “OFF”
will turn display backlight off after five minutes of keypad inactivity .
Press
next
to exit installer programming .
REGEN IMMEDIATE
ON ZERO
GAL
4
5
SERVICE ALARM GAL
SET
100
GAL
SERVICE ALARM
SET
OFF
GAL
ALARM BUZZER START
SET
ALARM BUZZER END
SET
6:00
AM
10:00
PM
ALARM BUZZER
SET
ON
7
LIGHT NORMALLY
SET
ON
8
6
SERVICE ALARM TIME
SET
1.25
YR
SERVICE ALARM
SET
OFF
YR
