WS2H and WS3 Drawings and Service Manual
Page 9
9. Power Adapter: If a Power Adapter is already connected to the control valve, plug the Power Adapter into
an uninterrupted outlet. If the Power Adapter cord has not yet been connected to the control valve, remove the
control valve cover and the drive bracket and thread Power Adapter cord through the hole in the back plate.
Reinstall the drive bracket. Weave the cord through the strain relief on the backplate and connect the end
to the four pin connector on the printed circuit board labeled POWER. Reinstall the cover. Plug the Power
Adapter into an uninterrupted outlet.
10. Program the control valve: It is very important to program the control valve for the type of system (e.g.
water softener of
fi
lter) and the end use application. Check the program used prior to testing the system.
Installation Summary
Installation Date: ___________________________________________
Installation Location: _______________________________________
Installer(s): _______________________________________________
Phone Number: ____________________________________________
Application Type: (Softener) _______ Other: ____________________
Water Source:
____________________________________________
Water Test Results:
Hardness: ___________ Iron: ___________pH: ___________________
Other: ___________________________________________________
_________________________________________________________
Misc:
Service Flow Rates: min. _________ max. ___________
Tank Size: Diameter _________ Height: ______________
Resin or Media Volume: ___________________________
Resin or Media Type: _____________________________
Capacity: _______________________________________
Salt or Fill Setting per Regeneration: _________________
Brine Tank Size: _________________________________
Control Valve Con
fi
guration:
Valve Type: _____________________________________
Valve Part Number: _______________________________
Valve Serial Number: _____________________________
Regenerant Re
fi
ll Control: _________________ gpm/lpm
Injector Size: ____________________________________
Drain Line Flow Control: __________________ gpm/lpm
