Water Right ASP-TW, Installation Instructions & Owner'S Manual

Page: 31 / 32

30 31
MANUAL REGENERATION
NOTE:
For softeners, if brine tank does
not contain salt, fill with salt and wait at
least two hours before regeneration. If
you need to initiate a manual regeneration
immediately, press and hold ����� until
valve motor starts (typically 3 seconds).
ERROR
If the display toggles between “Error” and
an error code (i.e. a number), call a service
technician and report the error code.
BYPASS VALVE OPERATION
To shut off water to the system, position arrow handles as shown in the bypass
operation diagram below. If your valve doesn’t look like the diagram below, contact
your service technician for instructions on how to shut off water.
REGEN TODAY MON
GPM
2:40 8
PM
REGEN TODAY
and
TIME OF DAY
will flash alternately if a regeneration
is expected tonight.
ERROR
106
CALL FOR SERVICE
QUICK REFERENCE GUIDE
GENERAL OPERATION
When the system is operating, one of five displays will be shown:
1. Time of day/gpm 4. Days to a regen
2. Flow rate 5. Dealer name and phone number
3. Capacity remaining
Pressing ���� will toggle between the five choices.
TO SET TIME OF DAY
In the event of a prolonged power outage, time of day flashes, indicating
that this needs to be reset. All other information will be stored in memory
no matter how long the power outage.
1. Accessed by pressing �����
2. Adjust hours with + and — buttons, AM/PM toggles at 12
3. Press ����
4. Adjust minutes with + and — buttons
5. Press ����
6. Adjust current day with + and — buttons
7. Press
����
to complete and return to normal operation
DAYS TO A REGEN
GPM
3 A
FLOW RATE
GPM
8.0
TIME OF DAY MON
GPM
2:40 A
PM
PHONE NUMBER
DEALER NA
A
CAPACITY REMAINING
GAL
1600 A
CURRENT DAY
SET
MON
TIME MINUTES
SET
TIME HOUR
SET
2:00
AM
2:00
AM
ADJUST HARDNESS, DAYS BETWEEN REGENERATION,
TIME OF REGENERATION AND ALARM BUZZER
For initial set-up or to make adjustments, please complete the following steps.
1. Accessed by pressing
����
and
+
button
simultaneously
2. Adjust hardness using + and — buttons
3. Press ����
4. Adjust days between regenerations
or number of times per day using
+ and — buttons
5. Press ����
6. Manufacturer has set
regeneration to occur when
zero gallons remain.
7. Press ����
8. Turn service alarm by gallons
ON with + and — buttons.
Default is OFF.
9. Press ����
10. Turn service alarm by time ON
with + and — buttons. Default
is OFF.
11. Press ���� three times
12. Turn alarm buzzer ON
or OFF with + and — buttons.
13. Press ����
14. Adjust alarm buzzer start time
with + and — buttons.
15. Press ����
16. Adjust alarm buzzer end time
with
+
and
—
buttons.
17. Press ����
18. Turn display backlight ON or OFF
with + and — buttons. Default is ON.
19. Press ���� to complete and
return to normal operation.
“TREATED”
WATER EXITS
SUPPLY
WATER ENTERS
SUPPLY
WATER EXITS
SUPPLY
WATER ENTERS
NORMAL OPERATION BYPASS OPERATION
ALARM BUZZER START
SET
6:00
AM
ALARM BUZZER END
SET
10:00
PM
SERVICE ALARM
SET
OFF
DAYS BETWEEN REGEN
SET
OFF
WATER HARDNESS
SET
20
GR
LIGHT NORMALLY
SET
ON
SERVICE ALARM
SET
OFF
REGEN IMMEDIATE
ON ZERO
GAL
GAL
YR
ALARM BUZZER
SET
ON
Return to
General Display