Water Co Admiral, Installation & Operation Manual

Page: 2 / 16

table of contents
Safety Information 2-3
General Instructions 3
Installation 4
RCD Operation 4
Removing Cleaner from Pool 5
Cleaning Filter Bags
5-6
Power Cord Maintenance 6-7
coNGRatULatIoNS
Congratulations and thank you for choosing our Admiral Pool Cleaner the most technologically advanced automatic
Robotic Pool Cleaner available.
We are sure you will find your new Admiral a pleasure to use. Before you use the cleaner, we recommend that you read through the relevant
sections of this manual, which provides a description of your cleaner and its functions.
To avoid the risks that are always present when you use a Robotic Pool Cleaner, it is important that the cleaner is installed correctly and that
you read the safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.
After unpacking the Admiral, please check it is not damaged. If in doubt, do not use the cleaner but contact the store where you purchased
the cleaner.
WaRNING
1. DO NOT RUN THE ADMIRAL OUT OF THE WATER. OPERATING THE CLEANER OUT OF THE WATER WILL DAMAGE THE MOTORS AND
VOID THE WARRANTY
2. THE ADMIRAL SHOULD Not BE CONNECTED TO A TIMING DEVICE AND LEFT CONTINUOUSLY WITHIN A POOL OR SPA.
3. DON’T USE EXTENSION CORDS OR ADAPTER PLUGS WITH THE ADMIRAL – AS THIS MAY AFFECT THE CLEANER’S PERFORMANCE AND
EXPOSURE TO ELECTROCUTION (EXPOSURE TO PERSONAL INJURY OR DEATH).
SaFetY INFoRMatIoN
1. Waterco’s Admiral Robotic Pool Cleaner is designed to work with water at a temperature greater than 13ºC (55ºF) and less than 45ºC (113ºF)
The cleaner should never be operated outside of these temperatures or damage may occur.
2. The installation should be carried out in accordance to local safety standards and bylaws.
3. Any modification of the Admiral requires the prior consent from Waterco. Original replacement parts and accessories
authorised by the manufacturer ensure a high level of safety. Waterco assumes no liability for the damage and injuries caused by
unauthorised replacement parts and accessories.
4. The user should make sure that the installation is carried out by qualified authorised persons and that these persons have first carefully
read the following instructions.
Storing The Power Cord 7
General Maintenance 8
Winter Storage 8
Warranty 8-11
Trouble Shooting 12-13
Notes 14-15
2