Body Temperature Detection Camera
User Manual
www.watchnetinc.com
65
Figure 6-6
Object Left Setting Interface
Step 2
Set all parameters for object left.
Step 3
Set a deployment area. Move the cursor to the drawing interface and click to
generate a point, move the cursor to draw a line, and then click to generate another
point. This is how a line is generated. In this way, continue to draw lines to form any
shape, and right-click to finish line drawing.
NOTE
A drawn line cannot cross another one, or the line drawing fails.
Any shape with 32 sides at most can be drawn.
The quantity of deployment areas is not limited yet and will be described in future when a
limit is applied.
Step 4
Set deployment time . Details please refer to 5.1.1 Step 2
---End
