Body Temperature Detection Camera
User Manual
www.watchnetinc.com
30
Figure 4-3
Image setting interface
Step 2
Click
in the lower left corner of Sensor Setting, and choose
Debug
Mode
.
Step 3
Drag the slider to adjust parameter of image.
Step 4
Click
Save
, the message "
Save succeed
" is displayed, the system saves the settings.
NOTE
Brightness :It indicates the total brightness of an image. As the value increases, the image
becomes brighter. It ranges from 0 to100.
Contrast
：
It indicates the contrast between the bright part and the dark part of an image.
As the value increases, the contrast increases. It ranges from 0 to 100.
Sharpness: it indicates the contrast between definition and edge sharpness. The higher
value, the higher definition and greater distortion. It ranges from 0 to 100
----End
4.4 Scene
Figure 4-4 shows the scene setting interface.
