Body Temperature Detection Camera
User Manual
www.watchnetinc.com
47
Parameter
Description
Setting
Mapping point
You need map three points at
two channels. Points are
correspond of each.
The three points should cover
most areas, and two points are
located in the diagonal display
of the picture.
Point one is green cross.
Point two is red cross.
Point three is blue cross.
[Setting method]
Select from drop list .
Step 3
Click
Apply
. The message "
Apply success
" is displayed, the system saves the
settings.
----End
5.3 Bad Point Check
NOTE
If the image is defect by detector’s fault, user can test the function to recover
the bad point. User should connect the manufactory at this condition to make
sure to apply.
Operation Procedure
Step 1
Choose
Configuration
>
human thermometer >bad point check, i
f there are some
bad point as shown in Figure 5-6.
