User’s Manual AM-215A Series RS-485
8/8
(UX-34108f)
WATANABE ELECTRIC INDUSTRY CO., LTD.
6-16-19, Jingumae, Shibuya-ku, Tokyo 150-0001, Japan
Phone: (81)3-3400-6140
Homepage http://en.watanabe-electric.co.jp/
ASAHI KEIKI DIVISION
WATANABE ELECTRIC INDUSTRY CO., LTD.
6-16-19, Jingumae, Shibuya-ku, Tokyo 150-0001, Japan
Phone: (81)3-3400-6141
Homepage http://www.watanabe-electric.co.jp/en/
Common response
Y
E
S
CR LF
5
(Normal response)
N
O
?
CR LF
5
(Response to, e.g., undefined commands.)
E
r
r
o
r
CR LF
6
(Response to out-of-range data or data that do not meet setting conditions.)
E
R
R
O
R
A CR LF
7
(Response when there is any communication parameter failure.)
Note: Under normal conditions, this response is made only once.
Note: ERROR B to ERROR F are available as the response commands for
acknowledgment.
Note: If a response to the ERROR X command is received, execute the same
processing once again. If the panelmeter still does not recover, turn off the
panelmeter once and then turn it on again.
Response in case of data failure in the
D
A
T
A
L
O
S
T
C
O
N
D CR LF
14
internal memory
(Response in case of condition data failure.)
Note: Under normal conditions, this
Note: Set the condition data again.
response is made only once.
D
A
T
A
L
O
S
T
C
O
M CR LF
13
(Response in case of comparator data failure.)
Note: Set the comparator data again.
D
A
T
A
L
O
S
T
M
E
T CR LF
13
(Response in case of scaling data failure.)
Note: Set the scaling data again.
