Wascomat Giant W 185, Operating & Maintenance Manual

Page: 28 / 56

21
29
3962
To change the wash programs
You can change the following parameters in the
wash programs by adding jumper wires to the
terminal block at the rear of the machine.
- no prewash
- only two rinses
Water level during prewash/mainwash
With jumper A (see figure) in place the machine
fills water to the high level during prewash,
mainwash and rinses.
If you remove jumper A the machine fills water to
the low level during pre- and mainwash and to
the high level during rinses.
Contact your local dealer for detailed information.
To change the wash programs
Fig.
29
Fig.
29
Terminal connection