39
94-0561-D
The Comms Settings Menu Pane displays the configuration of communications
between the Dashboard and Sensor. This menu only changes the local dashboard
record of the Sensor IP address. Changing the Sensor's IP address (stored in
the connect.ini file) is NOT possible from the dashboard but IS possible from
the SceneScan Service Interface Network Config tab 'Sensor on-board network
configuration' section (See
page 61
for the
Network Communication Settings
).
To View the Network Comms Settings:
1. Click on the Advanced button on the sidebar.
2. Click on the Comms Settings button on the Menu Pane.
To Modify the Dashboard’s Record of the Sensor’s IP Address:
1. Navigate to Advanced > Comms Settings.
2. Click on the Edit button.
3. Modify the IP Address field as required.
4. Click on Apply to confirm.
5.4
Support Information
5
Network Communication Settings
Summary of Contents for SCENESCAN
Page 82: ...94 0561 D...
