94-0601-C
33
Blanking Zone
Configuring the RS24 System
4
4.6
A Blanking Zone can be used to mask the segment of the scan rotation that is
obscured by the vessel’s superstructure. The start and end of the zone can be set
to any positions around the circle to the nearest degree.
Generally, once the Blanking Zone has been set, it will not need to be changed.
To Define a Blanking Zone
1. Click on the
Take Command
button if the RSI is not already In Command
mode.
2. On the
Blanking
tab, click on the
Edit
button.
3. Amend the Blanking Zone
Start
and
Stop
field as necessary (if you wish to
delete a zone, set Start and Stop to the same value).
4. Click on
Apply
to save the changes or on
Cancel
to discard.
