©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
106448A0
6. Remove the two push pull plastic fasteners.
NOTE: You will
not be reusing.
7. Remove the four center hex head bolts securing bumper
bracket and bull bar to vehicle.
NOTE: Retain bolts for later
use.
8. Remove bracket and bull bar assembly completely from
vehicle.
NOTE: You will not be reusing.
9. Trim front plastic fascia.
a. Remove the top two metal threaded nut clips from the
plastic.
b. With a hack saw blade or utility knife, carefully cut
notches about 3/8” wide and a 1/2” long to the inside
of the nut clip holes.
NOTE: Be careful not to cut into the
nut mounting holes as you will need to remount the
fascia.
Figure 3
Figure 4
Figure 5
Removed nut clips
Cut out notch
