©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
106448A0
Figure 2
Figure 3
I N S T A L L A T I O N I N S T R U C T I O N S
1. Release the grille by pulling down on the two top tabs.
2. Carefully remove grille by tipping grille forward and pulling
out until bottom tabs are clear of front fascia and bumper.
3. Remove the four torx head screws from the center bumper
plastic.
4. Remove the two torx head screws on each side of the
bumper plastic.
5. Carefully unsnap plastic fascia, starting from center and pull
away from vehicle. Once removed, set on a clean and stable
surface for later trimming.
Figure 1
