Do’s and Dont’s
DON’T
attempt to connect the heating cables to any power source prior to
completion of installation.
DON’T install the heating cable under any built-in items (i.e. tubs, vanity units,
bookshelves, walls or partitions), or under any zero-clearance, dedicated-
location furniture or appliances.
DON’T install the Warmup
®
Undertile™ Heating System under any floor other
than ceramic, quarry or natural stone tiles.
DON’T commence installation on a mud job/screed that has not been fully cured.
DON’T allow traffic over the primed floor or the installed heating cable before
tiling.
DON’T shorten the heating cable at any time.
DON’T allow the heating cables to cross over or touch each other at any point.
DON’T store tiles, sharp or heavy objects on any of the wiring while tiling or
bang a trowel on the installation area to remove excess mortar from the
trowel.
DON’T commence tiling before testing the Warmup® Undertile™ Heating System.
DON’T switch on the installed heating system until tile adhesive has fully cured
(1 - 3 weeks minimum), check adhesive manufacturer’s instructions.
DON’T clear grout lines with a utility knife.
DON’T install the heating cable on stairways, up walls or in closets.
DON’T attempt to repair the heating cable if it becomes damaged. Call the
technical helpline for further instruction:
1-888-927-6333
5