14 August 2019
All dimensions are in mm
Copyright
8
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
WETBACK INSTALLATION (OPTIONAL)
Notes:
A wetback CANNOT be fitted to fires that are installed in any area that falls under
clean air regulations i.e. under 2 hectares or clean air sheds.
Consult your Plumber for wetback system configurations and operation.
WARNING: DO NOT CONNECT TO AN UNVENTED HOT WATER SYSTEM.
Install in accordance with AS3500.4.1 or NZS4603 and the appropriate requirements
of the relevant building code or codes.
Wet Back Configuration
kW
Top only
2
Bottom only
3
Top and bottom
4
*Value is approx, tested on Lewis firebox
SEISMIC RESTRAINT FIXING
•
Remove bottom tray (remove bolts at back of tray and
slide forward to remove).
•
Drill through floor protector and ground as required
•
Bolt seismic restraint brackets to floor using 2x M8 bolts
(bolts should be appropriate to floor material).
•
Replace bottom tray (remember to fix it back to the
firebox).