![background image](http://html.mh-extra.com/html/hauck/nmc200-series/nmc200-series_instructions-manual_2107570001.webp)
NOZZLE MIX COMBINATION BURNER
NMC200 SERIES
Subject Page
A.
General Information ……………………………………………………….…..….…….
2
B.
Receiving and Inspection ………………………………………….…….…...…….…..
2
C. Capacities
………….……………………………………………………………………. 3
D. Dimensions
…………….………………………………………………………………... 4
E.
Typical Piping Schematics………………………………………………………………
9
F. Installation………………………………………………………………………………… 10
G. Operation…………………………………………………………………………………. 12
H. Maintenance……………………………………………………………………………… 12
INSTRUCTIONS
WARNING
These instructions are intended for use only by
experienced, qualified combustion start-up
personnel.
Adjustment of this equipment and its components,
by unqualified personnel, can result in fire,
explosion, severe personal injury, or even death.
These instructions are intended to serve as guidelines covering the installation, operation, and maintenance of Hauck equipment. While
every attempt has been made to ensure completeness, unforeseen or unspecified applications, details, and variations may preclude
covering every possible contingency.
WARNING: TO PREVENT THE POSSIBILITY OF SERIOUS BODILY INJURY, DO NOT USE OR
OPERATE ANY EQUIPMENT OR COMPONENT WITH ANY PARTS REMOVED OR ANY PARTS NOT APPROVED BY THE
MANUFACTURER.
Should further information be required or desired or should particular problems arise which are not covered
sufficiently for the purchaser’s purpose, contact Hauck Mfg. Co.
NMC-9
HAUCK MANUFACTURING CO.,
P.O. Box 90 Lebanon, PA 17042-0090 717-272-3051
1/08
www.hauckburner.com Fax: 717-273-9882
Summary of Contents for NMC200 Series
