33
warmhaus.com.tr
Pos No
Operation
Description
0
Attention:
This procedure must be applied by authorised persons and valid for only condensing boiler.
Attention:
Chimney Sweep mode time out is 30 Minute.
1
Keep pressing the CHIMNEY SWEEP button until CHIMNEY SWEEP symbol shown on the screen.
Release the button when CHIMNEY SWEEP symbol shown on the screen.
2
On the screen will appear CHIMNEY SWEEP symbol as blinking.
3
To set Minimum power, Push LO button at ones and wait the boiler reduce minimum fan speed.
4
When minimum power reached the symbol of flame level shown as also LOW ( 1/4 Digit )
5
To set Maximum power, Push HI button at ones and wait the boiler increase maximum fan speed.
6
When maximum power reached the symbol of flame level shown as also MAX ( 4/4 Digit )
7
Attention:
Make sure there is enough cooling on this operation specially set HI. Otherwise there could be
error codes related poor circulation or/and high temperature alarms.
8
To exit the CHIMNEY SWEEP MODE push the MODE button at ones.
3.8. SET SWEEPER MODE ( HI&LO )
Pos No
Operation
Description
0
In case there is an ERROR occur on the boiler. Press RESET button ones to remove the error code on the
screen.
1
ERROR code shown the screen with " PUSH the RESET BUTTON" symbol.
3.9. RESETTING
