Page 35
Figure 25 AS03-R32 Casing Dimensions & Heating Connection Locations
The heating flow and return connections are located on the right side panel of the AS01-R32,
AS02-R32 and AS03-R32 units as shown in the images above. The heating flow (Water Outlet)
is the top connection with the heating return (Water Inlet) at the bottom.
3.2
Access
In order to provide access for maintenance, a minimum space of depth 0.5m must be provided to
each side, 1.5m provided to the front and 0.4m provided to the rear of the unit. There should also
be a minimum space of depth 1m above the unit.
3.3 Unpacking
The unit is supplied on a small pallet and is covered with a cardboard box. The cardboard box
should be removed to reveal the unit with the supplied components. The unit is attached to the
SIDE
FRONT
TOP
Summary of Contents for A Series
