![background image](http://html1.mh-extra.com/html/warmflow/a-series/a-series_user-instructions_3395043029.webp)
Page 27
Ambient Temp. Compensation / Weather Compensation
– Press this button to enter the
Ambient Temperature Compensation (otherwise known as Weather Compensation) Sub-Menu.
Pressing the button brings up the following display screen. Ambient Temp / Weather
Compensation can be enabled/disabled using the On/Off button at the top right of the screen.
The compensated target is displayed at the bottom right of the screen which is calculated based
on the adjustable parameters, Slope and Offset. A simulated Ambient Temperature can be
entered into the Input At parameter to display the Compensated Target at that Ambient
Temperature. The slope and offset parameters can be changed to modify the weather
compensation curves to suit the property. Disabling weather compensation will invalidate the
SAP assessment (EPC). A commissioning certificate and label must be provided that confirm this
disablement.
Summary of Contents for A Series
