9
890464_k•en•2019-10-01
We reserve the right to carry out improvements
Changing the limit values
WATNIR
C
Changing these settings may impair the
safety of the system or reduce its effective-
ness. It is better to consult an expert if you
are not sure about the effect of a change.
Set the limit values as required for your system (to the
product most sensitive to the wind) based on the fol-
lowing table.
Wind speed limit
Photo limit
"Wind"
switch
position
Wind speed
limit (m/s)
"Brightness"
switch
position
Brightness
limit value
(klx)
TEST
Test
OFF
Off
1
2
1
5
2
3.5
2
15
3
6
3
20
4*
7.5*
4
25
5
9
5
30
6
10.5
6
35
7
12
7
40
8
13.5
8
45
9
15
9
50
10
16.5
10*
55*
11
18
11
60
12
19.5
12
65
13
21
13
70
14
22.5
14
80
15
25
15
>90
*= Factory setting
Iperation
Switching the sun control on/off temporarily
("W" button)
To temporarily switch off the sun control for a channel into
which the weather station has been learned in using the
W
button:
Press the
W
button and hold until the sun shading sys-
tem stops moving. Release the button again.
The sun control is now switched off for 12 hours. After
this period, the sun control is reactivated again auto-
matically.
To reactivate the sun control with the
W
button:
Press and hold the
W
button. Release the button again
when the sun shading system waves.
The sun control is active again.
ITNCE
R
The sun control can be switched off temporar-
ily with the master channel or with the auxiliary
channels.
Switching the sun control on/off permanently
Set the switch for the sun control on the weather sta-
tion to OFF.
The weather station stops sending brightness-related
move commands.
Set the switch for the sun control on the weather sta-
tion to the previous value to switch the sun control
back on.
Switching precipitation monitoring on/off
Press the
button on the weather station to switch
precipitation monitoring on or off. If precipitation
monitoring is switched on, the status LED lights up
permanently in green. When it is switched off, the LED
does not light up.
