890464_k•en•2019-10-01
We reserve the right to carry out improvements
8
Learning in the sun control individually
Perform the following steps consecutively:
Place receiver 1 into learn
mode:
Take the hand-held
transmitter into which the
master channel was learned
(I), press and hold the learn
button, external roller blind 1
waves once, release the but-
ton.
Set the switches on the
weather station:
The
"WIND" switch is located in
the "TEST" position and the
"Brightness" switch is in any
position other than the "OFF"
position. Precipitation moni-
toring is switched off (the
LED does not lights up green
permanently).
Learn in the sun control:
Press the
button on the
weather station and hold it
until the sun shading system
stops moving (the external
venetian blind waves once).
Release the button. The
weather station is now an
auxiliary channel for external
venetian blind 1. The sun
control was learned in at the
same time.
End the learn mode:
Take
the hand-held transmitter with
the master channel (I) and
press the "Up" or "Down" but-
ton.
The sun control is now learned into the sun shading
product.
Return the wind monitoring setting back to the original
value.
Ι
Ι
Learning in precipitation monitoring individually
Perform the following steps consecutively:
Place receiver 1 into learn
mode:
Take the hand-held
transmitter into which the
master channel was learned
(I), press and hold the learn
button, external roller blind 1
waves once, release the but-
ton.
Set the switches on the
weather station:
The "WIND"
switch is located in the
"TEST" position, and the
"Brightness" switch is in the
"OFF" position. Precipitation
monitoring is switched on
(LED lights up green perma-
nently).
Learn in precipitation moni-
toring:
Press the
button
on the weather station and
hold it until the sun shading
system stops moving (the
external venetian blind waves
once). Release the button.
The weather station is now an
auxiliary channel for external
venetian blind 1. Precipitation
monitoring was learned in at
the same time.
End the learn mode:
Take
the hand-held transmitter with
the master channel (I) and
press the "Up" or "Down" but-
ton.
Precipitation monitoring is now learned into the sun
shading product.
Return the wind monitoring and sun control settings
back to the original values.
Ι
Ι
