background image

11

890464_k•en•2019-10-01

We reserve the right to carry out improvements

Heartbeat function

The weather station cyclically sends a so-called "heartbeat 

pulse" to all receivers into which it is learned.
If the receiver does not receive measuring values for 24 h, 

it is assumed that the weather station has failed (heartbeat 

function). The receiver moves the connected product to 

a safe position. Depending on the type of sun shading 

product, operation is limited or impossible until a new valid 

value is received. This is a safety function and not an error.

WATNIR

C

  

If you force the sun shading system to move 

down by repeatedly activating the DOWN 

button when the weather station has failed, 

the safety functions are not active. The sun 

shading system may become damaged (e.g. 

due to high winds).

Technical data

EWFS Weather station plus

Min.

typ.

Max.

Anit

Supply

Operating voltage

85

230

253

V AC

Frequency

50

60

Hz

Power consumption

3

W

AF transmitter

Transmission frequency

433.92

MHz

Transmission power

10

dBm

Range (environment 

without interference)

30

m

Wind measurement

Wind speed

2

25

m/s

Locked time in case of 

wind alarm

10

min

Brightness measurement

Brightness

5

100

klx

Switch-off delay  

(if brightness falls below 

60% of the set limit value)

10

min

Enclosure

Dimensions in mm

(LxWxH)

248 x 59 x 207 mm

Degree of protection

IP43

Safety class

II

Miscellaneous

Conformity

available at 

www.warema.de/ce

This device meets the requirements on electromagnetic immu-

nity and electromagnetic interference for use in residential and 

commercial environments.
WAREMA Renkhoff SE declares herewith that this radio system 

type [EWFS Weather station plus] is in compliance with the 

current guidelines.

Wmbient conditions

Operating and storage 

temperature

-20

60

°C

Humidity

(non-condensing)

10

40

100

%RH

Pollution degree

2

Wrticle numbers

EWFS Weather station plus

1002 811

WAREMA Renkhoff SE

Hans-Wilhelm-Renkhoff-Strasse 2

D-97828 Marktheidenfeld

Summary of Contents for EWFS Weather station plus













Reviews: