CUSTOMER SUPPORT
+86-571-23290996
Model: Duplicator 10
TROUBLESHOOTING
Useful Terms
Display
LCD interface for operating the 3D Printer
Firmware
Software that is programmed into the electronic board
GCODE
Code that is produced using the slicing process. Describes the movements and temperature
settings of your 3D printer. Layer by layer instructions for your print.
Nozzle
Opening at the bottom of the print head where filament is pushed through
SD Card
Secure Digital memory card. This is where your GCODE files can be stored and accessed by the 3D
Printer
PLA Filament
Commonly used plastic filament with low environmental impact
Slicing
Process that turns a 3D Design into a code that can be used by 3D Printers
Spool
Filaments of PLA are wrapped, creating a spool
Stepper Motor
DC motors that move in discrete steps. This allows for precise positioning and/or speed control
.stl / STL
A common file format for 3D Designs/Models
USB Cable
This cable allows communication between the WANHAO 3D Printer and a computer, using
the USB port of the computer
Extruder Assembly
The section filament is pushed through encompassing the hot end and nozzle
Brim/Raft
Types of printed foundations that help madels adhere to the print bed
32
