CUSTOMER SUPPORT
+86-571-23290996
Model: Duplicator 10
MAINTENANCE & SETUP TIPS
Storage
PLA filaments are sensitive to moisture. If stored in a humid environment the quality of the
filament can deteriorate with a tendency to bubble and spurt from the nozzle tip. This will
affect print quality. Always store PLA that will not be used for an extended period of time.
* Store in a sealed, air tight bag/container. We recommend a vacuum seal bag
* Store with a silica gel (moisture absorber) pack. One is included with each filament spool
Saving files to SD Card
* Format new MicroSD Cards up to 32GB to FAT32
* Save files only in the root directory on the SD Card. The D10 will not read files in folders.
* Ensure your models are saved as GCODE files. STL and other 3D file formats should be
converted or 'sliced' into GCODE before loading them onto the SD Card. See the section
Creating a GCODE file using Cura for information on creating GCODE files
Creating a GCODE file using Cura
A GCODE file provides the essential temperature settings and movement information for your
WANHAO D10. A number of 'Slicer' software programs exist which convert a 3D model file
into a series of 3D printable layers. Cura is free open source slicer software released on the
AGPLv3 license. It is available on MacOS X and windows.
Installing Cura
1. Install the file located on your included SD Card or download Cura from
www.wanhao3dprinter.com
2. Select a destination folder for the install, then press'Next'
3. Select the components to install, then press 'Install'
4. Once complete, press 'Finish'
5. Refer to your computer manual of further instructions on the above steps if required
24
