CUSTOMER SUPPORT
+86-571-23290996
Model: Duplicator 10
SETUP
Adding the Duplicator 10 to Cura
On first launch Cura will ask you to add a 3D printer from the list provided. Select the Wanhao
D10 to automatically add the D10 profile. Alternatively, you can add a 3D printer by selecting
Machine Machine settings Add new Machine
1.
Select
Other
2.
Select
Custom...
3.
Enter Machine name as '
Duplicator 10
', or your desired name
4.
Input Machine width as
116mm
5.
Input Machine depth as
116mm
6.
Input Machine height as
126mm
7.
Change Nozzle size to
0.4mm
8.
Ensure heated print bed is
Not ticked
9.
Select
'Finish'
For the latest optimized / recommended Cura settings for your Duplicator 10, visit
www.wanhao3dprinter.con
1.
Clear the platform using
File clear platform...
2.
Then, load your 3D design file onto the platform using
File Load model file...
3.
Load any file with the following extensions:
.STL, .OBJ, .DAE, .AMF
TIP :
You can load more than one file onto the platform. Cura will automatically move the
additional files to fit
NOTE:
Files in grey are outside of the print area and need to be moved or scaled to fit.
Loading a 3D design into Cura
25
