CUSTOMER SUPPORT
+86-571-23290996
Model: Duplicator 10
SERVICING
Servicing your Duplicator 10
Replacing the print mat
The Duplicator 10 print surface is durable and easy to clean. Should you require a replacement,
additional print surfaces are available for purchase from
www.wanhao.store
1.
Lift the old print mat from the print bed
2.
Replace with the new print mat
If your Extruder nozzle becomes blocked,follow these steps to clean the nozzle.
1.
Remove the existing filament using the steps in
Filament > Remove filament
2.
Remove the PTFE tube from the extruder
3.
Using the included wire, insert and remove the wire to clear the blockage. Repeat until the
blockage is cleared
For additional tips and videos, visit wanhao3dprinter.com for support
Nozzle cleaning
26
