Further settings
83
Configuring the
interface
The interface must only be configured by suitably qualified and
competent persons.
Open the menu as follows:
button
Further settings
Interface
Interface
Ethernet
RS232
–
Ethernet
Configuration of an Ethernet interface
–
RS232
Configuration of a serial RS-232 interface
Select the type of interface and confirm your selection with
OK
.
Then the parameters for the interface must be configured.
Ethernet
–
Module status
Connection status displayed (
Active
/
Inactive
).
–
Address status
List of interface parameters, e.g. IP address, Subnet mask etc.
–
DHCP
The Ethernet interface can either be implemented via a Dynamic
Host Configuration Protocol (DHCP) or by setting the following
parameters:
–
IP address
–
Subnet mask
–
Standard gateway
–
DNS server automatic
–
DNS server 1
–
DNS server 2
–
Port type
–
Port
