Operation
53
Selecting a programme
Programme se-
lection buttons
Select a programme using programme selection buttons
,
or
.
Programme list
Press the
button and
use the
and
arrow buttons to highlight a programme and con-
firm your selection with
OK
.
Vario TD Dental
Temperature
Duration
Min
50
55 °C
The LED in the button selected lights up and the relevant programme
appears in the display. The LED in the
Start/Stop
button also starts to
flash.
Another programme can be selected at any time before a programme
has started. Once it has started, programme selection is locked.
The different programmes and their uses are described in “Pro-
gramme chart” at the end of these operating instructions.
Always select the programme depending on the type of load and de-
gree and type of soiling, or on infection prevention issues.
Starting a programme
Close the door.
When the door is closed, the LED in the
button will light up.
Press the
Start/Stop
button.
The LED in the
Start/Stop
button will light up constantly and the
LED in the
button will go out.
Starting a pro-
gramme using
delay start
The start of a programme can be delayed, for example, to benefit
from economy rates of electricity at night. Starting from the pro-
grammed time, a delay start time between 1 minute and 24 hours can
be selected in one minute increments (see “Settings
/Time of day”).
Delay start must be switched on (see “Settings
/Delay start”).
If soiling is left to dry on the load for longer, the reprocessing result
can be adversely affected. There is also a risk of corrosion for
stainless steel items.
