Installation
140
Securing to the
worktop
To improve stability the washer-disinfector must be secured to the
worktop after it has been aligned.
Open the door.
Screw the washer-disinfector to the continuous worktop through
the holes in the front trim on the left and right.
Please contact the W&H Customer Service Department to secure it
at the sides to adjacent cabinetry.
Venting the circu-
lation pump
The gaps between a built-in machine and adjacent cabinetry
must not be sealed, e.g. with silicone sealant, as this could com-
promise ventilation of the circulation pump.
Protective foil/
Worktop pro-
tector
The protective foil supplied protects the worktop from damage
caused by steam when the door is opened. It should be positioned
underneath the worktop above the machine door.
