Programme settings
92
Drying assistance
The additional “Drying assistance” function accelerates the drying
process at the end of the programme.
If drying assistance has been activated the door will automatically
open a few centimetres at the end of the programme to release steam
from the cabinet. The load will then be dried using passive heat given
off by the residual heat in the cabinet.
This method of drying does not comply with the requirements of
EN ISO 15883-1/-2. For this reason, items must be dried separately
before further processing (sterilisation) or storage.
Wash cabinet cool-
down phase
A cooldown pause follows the wash phase. During this pause, water
vapour is extracted from the wash cabinet and condensed by the
steam condenser. This reduces the moisture level in the wash cab-
inet, which promotes drying. In addition, this cools the wash cabinet
slightly.
...
Cabinet cooling down time
Cabinet cooling time
0
(0 - 30
Min
Min)
The setting value is entered in increments of 1 minute. The possible
range is shown in the bottom line of the display.
Use the arrow buttons
(higher) and
(lower) to set the cooling
down duration.
Press
OK
to save the setting.