manualshive.com logo in svg

W&H teon RID-100, Operating Instructions Manual, Page: 128 / 148

Share
Download
W&H teon RID-100 Operating Instructions Manual Download Page 128

After sales service

128

Software version

When contacting the Service department you may need the version
number of individual components of control software. These can be
called up as follows:

Open the menu as follows:

 button

    

 

Further settings

        

 

Software version

Software version

EB Id: XXXXX

EGL Id: XXXXX

The software units are listed on the display. 

XXXXX

 stands for the rel-

evant version number:

–

EB ID: XXXXX

Software version of the control and display units in the control
panel.

–

EGL ID: XXXXX

Software version of the control board.

–

EZL ID: XXXXX

Software version of the relay board.

–

EFU ID: XXXXX

Software version of the frequency converter.

–

LNG ID: XXXXX

Language package version.

You cannot change any settings in this menu.

Software updates and upgrades may only be undertaken by the
W&H Customer Service Department.

Exit the menu with the 

OK

 or 

 buttons.

Summary of Contents for teon RID-100





















































































































































Reviews:

No comments