Installation
130
Building under a continuous worktop
Removing the
lid
To build the machine under a continuous worktop the lid must be re-
moved as follows:
Unscrew both securing screws from the lid at the back of the ma-
chine.
Open the door.
Unscrew the left and right fixing screws.
Lift the lid off.
Steam condenser
To avoid steam damage to the worktop the protective foil supplied
(25 x 58 cm, self-adhesive) must be applied underneath the work-
top in the area of the steam condenser.
Securing to the
worktop
To improve stability the washer-disinfector must be secured to the
worktop after it has been aligned.
Open the door.
Screw the washer-disinfector to the continuous worktop through
the holes in the front trim on the left and right.
Please contact the W&H Customer Service Department to secure it
at the sides to adjacent cabinetry.