Adding and dispensing chemical agents
46
Rinsing agent
Rinsing agent is necessary to ensure water does not cling and leave
marks on load items, and to help load items dry faster after they have
been reprocessed.
The rinsing agent in the
Final rinse
programme stage is dispensed
automatically. For this, the container must be filled.
Rinsing agent poses a health risk.
Residues of rinsing agent remain on the surface of load items after
they have dried.
It is important to check the suitability of the rinsing agent being
used.
Adding rinsing
agent
Do not fill with cleaning agent.
This would damage the reservoir.
Only fill the rinsing agent reservoir with rinsing agent for washer-
disinfectors.
Open the door fully.
Unscrew the yellow lid with the
symbol in the direction of the ar-
row.
The container holds approx. 300 ml.
Add rinsing agent only until it is up to the “max.” mark on the edge
of the funnel.