Installation
16
Step
Description
Image
7
Tighten the tap on the storage tank.
Attention: seal the thread with PTFE tape. Do not
use glue nor paste as a sealant.
8
Insert the white tube (from the fitting “TANK” of the
Osmo) in the storage tank tap and tighten it with the
ring nut.
9
Connect the white tube in the fitting “OUT” of the
Osmo.
This is a quick-connector fitting: insert the tube until
it hits the back of the fitting and pull slightly to check
it is correctly inserted.
To take the tube out of the fitting, press the fitting
ring with your fingers and pull out the tube.
