Installation
14
Step
Description
Image
2
Connect the Water Block
®
valve to the water
network tap.
3
Tighten the quick-connector fitting ¾“ (ø 8 mm) to
the Water Block
®
valve outlet.
Attention: seal the thread with PTFE tape. Do not
use glue nor paste as a sealant.
4
Remove the red cap from the “IN” fitting of the Osmo
and tighten the quick-connector fitting ¾“ (ø 8 mm)
on it.
Attention: seal the thread with PTFE tape. Do not
use glue nor paste as a sealant.
Check that the
filter is present
