W&H Implantmed, Instructions For Use Manual

Page: 27 / 64

27
9. Control unit operation
Activate the desired program (P1 – P5) by pressing the corresponding program button.
During selection an audible signal can be heard and the Program button lights up.
The selected program appears on the display with the adjusted range in rpm, e.g. for P1:
rpm
Ncm
rpm
Display settings
> P1 – P3 speed
> P4 – P5 torque
Pump function
ON / OFF
Display settings
> P4 – P5 torque in Ncm
> P1 – P3 speed in rpm
Error messages
> Motor temperature too high
> Motor push-in connection
Always make sure that the LED displays on the buttons and the display itself are all on when switching on the Implantmed.
Changing program (P1 – P5)