W&H Implantmed, Instructions For Use Manual

Page: 14 / 64

14
5. Safety notes
> Before using the Implantmed for the first time, store it at room temperature for 24 hours.
> Check the control unit and the motor with cable for damage and loose parts every time before use.
> Do not operate the control unit and the motor with cable if it is damaged.
> Check the parameter settings every time the device is restarted.
> Perform a test run prior to every treatment.
> The responsibility for the use and timely shutdown of the system lies with the user.
> Ensure that it is possible to complete the operation safely should the control units or instruments fail.
The Implantmed is not approved for operation in potentially explosive atmospheres.
Do not twist or kink the motor cable! Do not coil it too tightly!
Moisture in the motor with cable may cause a malfunction! (Risk of short circuit)
Control unit / Motor