W&H Implantmed, Instructions For Use Manual

Page: 16 / 64

16
Safety notes
Mains cable / Power switch
> Only use the mains cable supplied.
> Plug the mains cable only into an earthed power socket.
> Set up the control unit so the power switch and the socket are easily accessible at all times.
Disconnect the control unit from the power supply in case of danger.
> Turn off the control unit at the power switch.
> Pull the power plug out of the socket.
Rotational energy
Deceleration of the bur can, cause the selected torque to be temporarily exceeded,
compared to the value set, as a result of the rotational energy stored in the drive system.
Observe the manufacturer’s speed and torque specifications for retaining screws for superstructures.
Adjusting these retaining screws with an electric motor presents a potential risk as described above.
Control unit / Motor