Rev. 1.0
WALTHER Temperature Controller Bundle WTRB-x-x
Page 38 of 42
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
Alarm function
– actual value (AFPr):
Analog input 1
Alarm function
– desired value (AFSP):
Current desired value
Turn-on delay (tOn):
0 s
Timer:
Function (Fnct):
No function
Outputs:
Analog output:
Not existing
Binary outputs:
Function binary output 1:
Limit value monitoring 1
Function binary output 2:
Controller outlet 1
Function binary output 3:
Limit value monitoring 2
Binary Function:
Binary input:
Function:
Locking levels
Limit value monitoring:
1.Limit value monitoring:
Function:
None
2.Limit value monitoring:
Function:
None
Timer :
Function:
None
Display / Operation:
Display
Upper display (diSU):
Actual value
Lower display (diSL):
Current desired value
Change display for timer start (diSt):
No change in display
Decimal place (dECP):
XXX .X
Operation
Timeout (tout):
180 [s]
Locking levels (CodE):
Parameter and configuration level
Function key short (tAS):
No function
Function key >2 sec (tASt):
Switch to manual operation
Interface:
Baud rate (bdrt):
9600 Baud
Device address (Adr):
1
Table 5:
Parameters of the WTR-x in the standard configuration
