background image

 

 
 

 

 

 2  

 

 

This air blower is a quality product with special focus on high functionality, 
easy handling, safety and reliability. As technical work equipment this air 
blower is designed for use in industrial commerce and for operators that 
have been trained by qualified personnel to use technical devices / tools. 

Customer Care: 
Within the framework of our individual customer care we are well prepared 
to answer your questions regarding use and operation as well as regarding 
any possibly arising problems. 

Service and Maintenance: 
To maintain the high technical productivity and reliability of our air blower 
for many years we recommend regular inspection and maintenance. 
Our customer service provides optimal support which we offer within the 
framework our service and maintenance agreement.  
Please do ask for our quotation. 

Carl Kurt Walther GmbH & Co. KG 
Westfalenstraße 2 
42781 Haan 
Germany 

Postfach 42 04 44 
42404 Haan 
Germany 

Phone: 

 

+49 (0) 2129/567-0 

Telefax:   

+49 (0) 2129/567-450 

E-Mail: 

[email protected]

 

Internet: 

www.walther-praezision.de

 

 
 

Contact

Application Engineering and Service 

Holger R. Figge 
Phone: 

 

+49 (0) 2129/567-591 

Telefax: 

 

+49 (0) 2129/567-590 

Mobile: 

 

+49 (0) 162/2090100 

E-mail: 

[email protected]

 

 
 

 

Please find further addresses and phone number  
of our contacts on our homepage 

www.walther-praezision.de

 

“Technical Service”. 

Summary of Contents for 95001
















Reviews: