background image

 

Operating Instruction 

English  

Type 95001 

 
 

Product Description  

 

 8  

 

 

Product Description  

5.1 

Intended Use  

-  The air blower is intended for air-cleaning of objects and places difficult to access  

as well as blow drying of damp places. 

5.2 

Technical Description 

material:

 

plastics 

-  to avoid any negative influence on the material property (plastic) of the housing of the 

air blower, the air blower must not be cleaned with benzene or alcoholic cleaning 
agents. 
Similarly, when heavily oily it should be cleaned with water only. 

-  Should damage occur on the plastic housing despite the observation of these notes 

the air blower must not be used further. Bursting or yielding of the thread on the nozzle 
connection is possible. 

5.3 

Technical Data  

The air blower can be equipped with various connections. 
These connections can be inquired at the manufacturer Walther-Präzision. 

The nozzles are designed in such way to provide a wide protection against improper use so 
that any excessive buildup of pressure is avoided when placed on skin.  
Nevertheless the blowing force is underestimated.  
Pressure is often unnecessarily increased for subjective reasons, this is not necessary. 

Working pressure: 

5-6- bar 

Max. working pressure:  8 bar 

Operating temperature:  -10°C bis +50°C 

Noise level: 

(measured in ca. 1m distance to the air 
blower) 

 

see table 

 

 

-  the air blower is not intended for any other 

usage and technical values than indicated in  

 

the product description. 

-  If the air blower is used not according to the intended use and the respective technical 

values no safe operation can be ensured. 

-  Regarding any and all personal injuries and damage to property resulting from any and all 

use not according to the intended use or to the technical values not the manufacturer but the 
operator of the air blower is responsible and liable 

 

Inlet pressure 

Noise level 

1 bar 

70 dB/A 

2 bar 

72 dB/A 

3 bar 

74 dB/A 

4 bar 

76 dB/A 

5 bar 

78 dB/A 

6 bar 

80 dB/A 

Summary of Contents for 95001
















Reviews: