WALTHER PILOT V 20 363, Operating Instructions Manual

Page: 13 / 21

25 24
Listing of Contents
Exploded Drawing 2
Dimension Sheet 4
Declaration of CE-Conformity 25
Replacement parts 26
1 General 28
1.1 Identification of Model Version 28
1.2 Normal Use 28
1.3 Improper Use 29
2 Technical Description 29
3 Safety Warnings 30
3.1 Safety Warning Symbols 30
3.2 General Safety Precautions 30
4 Assembly/Installation 31
4.1 Mounting of Spray Gun 31
4.2 Connection of Input Lines 31
5 Operational Handling 32
5.1 Safety Warnings 32
5.2 Starting/Stopping Requirements 32
5.3 Spray Pattern Test 33
5.4 Adjusting the Spray Pattern 33
5.5 Retooling of Spray Gun 34
6 Cleaning 34
6.1 Safety Warnings 34
6.2 Cleaning - Complete 35
6.3 Cleaning - Routine 36
7 Repairs/Replacements 36
7.1 Replacement of defective Neddle Seal Packings 36
7.2 Replacement of Nozzles, Needles, Springs and Seals 37
8 Troubleshooting and Corrective Action 37
9 Disposal of Cleaning/Servicing Substances 38
10 Specification Data 38
EC/EU Declaration of Conformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility
that the product(s) described below conform to the essential safety requirements. This
declaration will be rendered invalid if any changes are made to the equipment without
prior consultation with us.
Manufacturer
WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation
Automatic Spray Gun PILOT Signier
Marking Gun - flushable V 20 363
Marking Gun - flushable circulation V 20 365
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006/42/EC
2014/34/EU (ATEX Directives)
DIN EN ISO 12100
DIN EN 1953 DIN EN 13463-1
DIN EN 1127-1 DIN EN 13463-5
Specification according 2014/34/EU
Category 2 Part marking II 2 G c T 5
Tech.File,Ref.:
2408
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the
provision of the Directives 2006/42/EC.
Wuppertal, the 2nd of November 2016
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety
instructions provided in the product documentation must be observed at all times.
p.p.