WALTHER PILOT PILOT Misch-Automatik, Operating Instructions Manual

Page: 18 / 19

35 34
For the PILOT Misch-Automatik WALTHER has a repair set with all wearing parts
available :
Parts No.: V 16 243 40 000
Wearing parts are also shown in the listing of replacement parts (in bold face).
8 Troubleshooting and Corrective Action
Warning
Prior to any servicing and repair work: Make sure that the spray gun is in unpressu-
rized condition, i.e. all air and material inputs must be shut off - if not, imminent risk
of injury.
Fault Cause Remedy
Gun is dripping Material nozzle or needle
fouled
Material nozzle or needle
damaged
Needle gland nut too
tight
see 5.5 Retooling the Spray
Gun and cleaning
see 7.2 Replacing Material
Control Nozzle or Needle
Loosen needle gland nut
(Item 15) in slightly with a
screw driver
Gun fails to open Control air pressure too
low
Increaese control air pressu-
re to at least 4.5 bar
Spray jet pulsating or
unsteady
Level in material tank too
low
Top-up material level (see
operating instructions of plant
systems manufacturer)
9 Disposal of Cleaning / Servicing Substances
Disposal of any such substances must be in accordance with all applicable local and
national regulations, directives and laws.
Warning
Pay special attention to all processing specifications and safety warnings issued by
the manufacturers of spraying and cleaning media. The improper disposal of any
toxic waste material represents a serious threat to the environment, i.e. to the health
of mankind and animal life.
10 Specification Data
Weight:: 795 g
Nozzle Sizes: ▪ 0,5 ▪ 0,8 ▪ 1,0 ▪ 1,2 ▪ 1,5 ▪ 1,8 ▪ 2,0
▪ 2,2 ▪ 2,5 mm ø (further sizes on request)
Connections:
Atomizing Air G 1/4“
Control Air G 1/4“
Material Inlet Hose grommet 8 mm inside
Material Inlet: Hose grommet 9 mm inside
Pressure Ranges:
Control Air mind. 4,5 bar
Material pressure max. 8 bar
Atomizing Air max. 8 bar
max. Operating Temperature
of Spray gun 80 °C
Sound Level
(measured at a distance
of 1 m from the spray gun) 86 dB (A)
Air Consumption
in litres/min.:
Air input of the Air consumption
spray gun
Round fan Wide fan
1,0 bar 230 280
2,0 bar 290 390
3,0 bar 340 450
4,0 bar 390 510
5,0 bar 430 550
6,0 bar 470 600
Right to effect technical changes reserved.