WALTHER PILOT PILOT Misch-Automatik, Operating Instructions Manual

Page: 11 / 19

21 20
Contents
Exploded drawing 2
Declaration of CE-Conformity 21
Listing of replacement parts 22
1 General 24
1.1 Identification of Model Version 24
1.2 Normal Use 24
1.3 Improper Use 25
2 Technical Description 25
3 Safety Warnings 25
3.1 Safety Warting Symbols 25
3.2 Generally Applicable Safety Precautions 26
4 Assembly / Installation 26
4.1 Mounting of Spray Gun 27
4.2 Connection of Input Lines 27
5 Operational Handling 28
5.1 Safety Warnings 28
5.2 Starting/Stopping Requirements 28
5.3 Spray Pattern Test 28
5.4 Spray Pattern Adjustments 29
5.5 Retooling of Spray Gun 30
6 Cleaning 31
6.1 Safety Warnings 31
6.2 Cleaning - Complete 31
6.3 Cleaning - Routine 32
7 Repairs / Replacements 33
7.1 Replacement of defective Needle Seal Packings 33
7.2 Replacement of Nozzles, Needles, Springs and Seals 33
8 Trouble shooting and Corrective Action 34
9 Disposal of Cleaning / Servicing Substances 34
10 Specification Data 35
Declaration of CE-Conformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility
that the product(s) described below conform to the essential safety requirements. This
declaration will be rendered invalid if any changes are made to the equipment without
prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation Automatic Two-Component-Spray Gun
PILOT Misch-Automatik V 24 340
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006 / 42 / EC
94 / 9 EC (ATEX Directives)
DIN EN ISO 12100-1
DIN EN ISO 12100-2 DIN EN 1953
DIN EN 1127-1 DIN EN 13463-1
Specification according 94 / 9 / EC
Category 2 Part marking II 2 G c T 5
Tech.File,Ref.:
2409
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the
provision of the Directives 2006 / 42 / EC.
Wuppertal, the 23rd of February, 2010
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety
instructions provided in the product documentation must be observed at all times.
i.V.